Browsing MS Theses - DO NOT EDIT by Title
Now showing items 500-519 of 665
-
Parametric Multi-Objective Optimization of Cold Plate for Single-Phase Immersion Cooling
(2023-05-19)**Please note that the full text is embargoed until 05/16/2025** ABSTRACT: The increasing demand for high performance computing in applications such as Internet of Things, Deep Learning, Big data for crypto-mining, virtual ... -
PARAMETRIC STUDY OF AN IGBT COLD PLATE AND AFFECT OF DEVICE LEVEL MODELLING ON SYSTEM LEVEL THERMAL PREDICTIONS
(2016-02-29)In power electronics, as there is continuous increase in performance of the electronic devices, simultaneously the size of the components used in these devices keep on decreasing. This has resulted in increased power ... -
Particle Advection Using The Lattice-Boltzmann Method
(Aerospace Engineering, 2013-03-20)Lattice-Boltzmann Method (LBM) CFD analysis can be helpful in analysing fluid flow through porous media and complex geometries that may be difficult to simulate using traditional CFD methods. In this thesis, the technical ... -
Peak Stress Of Composite Multiple-hole Laminates With And Without Patch
(Aerospace Engineering, 2010-07-19)In repairing of composite structures, the damage in the composite laminate is usually removed in the form of circular cutouts which results in holes in the laminate. Then a patch laminate is adhesively bonded to the damaged ... -
Performance Analysis Of A Helium Cooled VHTR Powered Brayton Cycle Topping Unit On An Existing Steam Cycle Using Numerical Propulsion System Simulation
With the decommissioning of ageing coal power plants due to outdated technology and high levels of air pollution, the advantages of overhauling existing infrastructure is twofold. First, by providing an alternate, sustainable ... -
Performance Characteristics Of Single Effect Lithium Bromide/ Water Absorption Chiller For Small Data Centers
A medium data center consists of servers performing operations such as file sharing, collaboration and email. There are a large number of small and medium data centers across the world which consume more energy and are ... -
PERFORMANCE ENHANCEMENT OF RASPBERRY PI SERVER FOR THE APPLICATION OF OIL IMMERSION COOLING
(2016-05-13)The power consumed by Central Processing Unit (CPU) generates the heat which is undesirable and which is further responsible for the damage of Information Technology equipment. Oil Immersion cooling is one of the emerging ... -
Performance Evaluation Of Compliant Foil Seal
The concept of foil bearings has gained large acceptance in the industry and is been applied for various rotating equipment including air cycle machines, cryogenic turbo-expanders, centrifugal compressors and gas turbine ... -
Performance Evaluation of Plate-fin and Pin-fin Heat Sinks for The Application of Oil Immersion Cooling and Design Optimization of Dynamic Cold Plate for The Application of Warm Water Cooling
(2016-05-10)In IT industries, to keep server rooms and data centers cool is a constant challenge for hardware developers and the cooling solution providers. Air cooling is the most widely used approach for thermal management of servers ... -
Performance Optimization Of Multi-core Processors Using Core Hopping - Thermal and Structural
(Mechanical Engineering, 2011-10-11)As the work load on the single core processor increases, it's processing speed increases resulting in increased power densities and die temperatures. The increase in die temperature results in decreased performance and ... -
Plate Analysis With Different Geometries And Arbitrary Boundary Conditions
(Mechanical Engineering, 2012-04-11)This thesis work deals with the study of plates with various geometries and different boundary conditions. The method of study is carried out mainly using the Galerkin method combined with the help of the symbolic algebraic ... -
Point Measurement Of Detonation Wave Propagation Using Ion Guage
(Mechanical Engineering, 2014-03-12)Accurate measurement of detonation wave velocity is important in the study of detonations. Detonation wave velocity is calculated by the ratio of distance between two transducers which the wave front travels over the ... -
Polymer Tube Embedded In-plane Micropump: Design, Analysis And Fabrication
(Mechanical Engineering, 2007-08-23)This thesis presents the design, analysis, and fabrication of a novel polymer tube embedded in-plane micropump. The key component of the proposed micropump is a Parylene polymer tube that is embedded into the trench of a ... -
PREDICTING MECHANICAL BEHAVIOR OF 3D PRINTED STRUCTURES USING MECHANICS OF COMPOSITES AND FRACTURE
(2018-05-22)Recently, additive manufacturing, or 3D printing as it is more commonly called, has taken a big leap in the manufacturing industry. This technology is rapidly moving from prototyping to manufacturing using metals, polymers, ... -
Prediction and Validation of Continuous Fiber Stiffened Plates Manufactured With Continuous Fiber Fabrication
(2020-06-03)The purpose of this thesis was to develop an analytical method for predicting the structural properties of continuous fiber stiffened plates, which was then validated both experimentally and via finite element analysis. ... -
PREDICTION OF PROCESS-INDUCED DEFECTS BY PLY-DROPS IN THE DESIGN OPTIMIZATION OF A COMPLEX COMPOSITE LAMINATE
(2017-08-28)The objective of this work is to characterize manufacturing process-induced warping defects due to ply drops in composite laminates to guide composite laminate design. Composite laminate optimization seeks weight ... -
PREDICTION OF SOLDER JOINT FATIGUE LIFE OF PHOTONIC PACKAGE USING Ⅲ-Ⅴ MATERIALS
(2021-12-14)Fatigue life prediction has become very important factor in reliability of any electronic components to withstand extreme thermal stresses in industrial standard. Hence, photonic packages are widely used in telecommunication ... -
Preliminary Design Of Mesoscale Turbocompressor And Rotordynamics Tests Of Rotor Bearing System
(Mechanical Engineering, 2011-10-11)A mesoscale turbocompressor spinning above 500,000 RPM is evolutionary technology for micro turbochargers, turbo blowers, turbo compressors, micro-gas turbines, auxiliary power units, etc for automotive, aerospace, and ... -
PROBABILISTIC RISK ASSESSMENT AND THE PATH PLANNING OF SAFE TASK-AWARE AUTONOMOUS RESILIENT SYSTEMS (STAARS)
(2019-05-16)Recent advancements on the unmanned systems manifest the potential of these technologies to impact our daily life. In particular, the unmanned aircraft systems (UAS) become ordinary for people in almost any area from aerial ... -
Process Calibration for Elastically Scaled 3D Printed Models using Fused Deposition Modeling
(2018-12-18)With the increase in additive manufacturing capabilities the use of 3D printed models characterize a critical point for evaluating aerodynamic and aeroelastic properties on aircraft configuration. An experimental and ...