Search
Now showing items 391-400 of 916
INVESTIGATION ON EFFECTIVE MODULUS AND STRESS CONCENTRATION FACTOR OF 3D REINFORCED COMPOSITE BY FINITE ELEMENT ANALYSIS METHOD
(2018-05-24)
Micromechanics of Composites aims to analyze the localized stresses inside any
given constituents of the composite structure. This Thesis is focused on Calculating the
effective modulus and the Stress concentration factor ...
COMPUTATIONAL STUDY OF FORM FACTOR OF 3RD GENERATION OPEN COMPUTE SERVERS USING DIFFERENT DIELECTRIC FLUIDS FOR SINGLE-PHASE IMMERSION COOLING
(2018-05-24)
Computer system dependency has been increased in the modern world and that has encouraged the rapid growth of data centers in leading business units like banking, education, transportation, social media and many more. Data ...
Experimental and analytical study of a self-regulated Flow Control Device developed for dynamic cold-plates to cool high-power density multi-chip modules
(2019-11-21)
Modern high-power density modules often demand high amounts of power be
invested in their cooling processes. Uneven heating at the chip level creates hotspots
and temperature gradients across the module. A very effective ...
ELECTROSPINNING APPROACH FOR THE IMPROVEMENT OF MECHANICAL AND DIELECTRIC PROPERTIES OF ANISOTROPIC NANOFIBER MAT BY USING A NOVEL FIBER ALIGNMENT TECHNIQUE
(2018-12-05)
Many advanced applications, including aerospace, can benefit from materials with superior mechanical and dielectric properties. For these applications, most fiber alignment electrospinning research has focused on either ...
Sensor Tasking for Satellite Tracking Utilizing Observability Measures
(2018-12-06)
In this thesis, novel observability-measure based sensor tasking methods are studied for satellite tracking applications. The tasking is performed by first computing the Hellinger Distance between ground/space based sensors ...
Process Calibration for Elastically Scaled 3D Printed Models using Fused Deposition Modeling
(2018-12-18)
With the increase in additive manufacturing capabilities the use of 3D printed models characterize a critical point for evaluating aerodynamic and aeroelastic properties on aircraft configuration. An experimental and ...
STUDYING EFFECTS OF ADHESIVE LAYER ON ELECTRICAL SIGNALS OF PIEZOELECTRIC TRANSDUCER BONDED WITH STRUCTURE
(2018-01-24)
Piezoelectric wafer active sensors (PWAS) are the most attractive transducers for guided-wave or ultrasound based structural health monitoring (SHM) because of their light weight and compact size. In order to excite guided ...
FREQUENCY TUNING OF VIBRATION ABSORBER USING TOPOLOGY OPTIMIZATION
(2017-05-08)
A tuned mass absorber is a system for reducing the amplitude in one oscillator by coupling it to a second oscillator. If tuned correctly, the maximum amplitude of the first oscillator in response to a periodic driver will ...
FLEXIBLE-CONTINUUM ROBOT FOR BLADDER TISSUE DIAGNOSTICS
(2017-09-14)
The aim of this thesis is to investigate and develop a robotic system capable of a transurethral
palpation of any targeted area on the bladder interior wall tissue to determine the biomechanical properties of the tissue ...
NUMERICAL STUDY OF MARANGONI CONVECTION AND MASS TRANSPORT IN MICRODROPLETS
(2017-05-24)
Marangoni convection is a flow resulting from a surface tension gradient at air/liquid interface caused by temperature gradient, concentration of surfactant or applied electric field. Marangoni convection when caused by ...