Search
Now showing items 21-30 of 37
Morphology And Cathode Optimization For Efficient Polymer Bulk Heterojunction Solar Cells
(Materials Science & Engineering, 2009-09-16)
Efficiency of polymer bulk heterojunction solar cell is highly dependent on the active layer morphology and can be controlled by specific experimental conditions. In this work, the influences of P3HT:PCBM blend composition, ...
Thermally Activated Sulfurization Scheme for CuInS2 Solar Cells
(Materials Science & Engineering, 2008-04-22)
Chalcopyrite Solar Cells are now being fabricated on flexible (polymer)
substrates. However, CuInS2 solar cells have not been fabricated on the polymer
substrates on the commercial scale due the sulfurization temperature ...
Piezoelectric Micropump For Drug Delivery Application
(Materials Science & Engineering, 2007-08-23)
Bending type actuators providing high displacement (~1mm) with low blocking force (~0.5N) and the stack actuators providing low displacement (~1m) with high blocking force (~1kN) represent the extreme ends of ...
Experimental Study Of Laminated Composite Tubes Under Bending
(Materials Science & Engineering, 2007-08-23)
Bending stiffness of laminated composite tubes was determined experimentally using four-point bending test. The experimental results were compared with the results obtained by the laminated plate and smear property approaches. ...
Synthesis, Structure And Characterization Of Silver Doped Diamond Like Carbon Thin Films
(Materials Science & Engineering, 2008-04-22)
Diamond like carbon (DLC) films have gained grounds in the biomedical field as an inert, biocompatible, low friction and wear resistant coating and are widely used in heart valves, coronary artery stents, dental implants, ...
Thermal Failure Mechanism And Voltammetry Metrology For Cu/barrier/low K Integration
(Materials Science & Engineering, 2007-08-23)
The present study investigates the thermal stability of Cu/barrier/porous low κ (PLK) integration first, and then a new characterization method based on voltammetry is developed to characterize quality of diffusion ...
Fabrication And Characeterization Of Granular Magnetic Gold Nanoparticles
(Materials Science & Engineering, 2009-09-16)
In recent years, gold and magnetic nanoparticles have showed great potential in biomedical applications. Magnetic nanoparticles can be used in both in- vivo and in-vitro applications such as drug and gene delivery, ...
Cathodic Electrodeposition Of Cadmium Oxide, Zinc Oxide And Mixed Cadmium Oxide-Zinc Oxide Thin Films
(Materials Science & Engineering, 2007-08-23)
Cadmium oxide (CdO) and (CdO)x(ZnO)1-x mixed semiconductor films were cathodically electrodeposited for the first time on F-doped SnO2 substrates. The CdO thin films were deposited from an aqueous 0.1 M KCl medium containing ...
Surface Patterning Of Biodegradable Polymer In Tissue Engineering By Applying Photolithography
(Materials Science & Engineering, 2008-04-22)
The prevalence of cardiovascular disease and inherent problems with current surgical therapies has prompted major efforts in the field of vascular tissue engineering. While there have been significant advances towards ...
Fabrication Of FePt Ferromagnetic Nanoparticles
(Materials Science & Engineering, 2008-08-08)
Fabrication of chemically disordered FePt particles ranging from 2 - 9 nm with a precision of 1 nm has been achieved through modification of key process variables including surfactant concentration, heating rates and the ...