Browsing by Title
Now showing items 15789-15808 of 24439
-
NUMERICAL ANALYSIS OF IMMERSION COOLING ON A SERVER USING AL2O3/MINERAL OIL NANOFLUID
(2020-08-10)In the current world, technology has developed significantly, with a massive processing and storage of data, resulting in the high increase in Power Density and Heat Generation of servers, computers and its components in ... -
Numerical Analysis Of The Interaction Between A Detonation Wave And Compressible Homogeneous Isotropic Turbulence
(Mechanical Engineering, 2011-07-14)A numerical study was performed to investigate the effect of preshock turbulence on the detonation wave properties. A direct numerical simulation was performed on the chemically reactive Navier-Stokes equations using a ... -
Numerical and Analytical Study of Curvature Effects in Laminar Shock Wave/Boundary Layer Interactions
Shock wave/boundary-layer interactions (SBLIs) are one of the most complex flow phenomena because of the different types of physics involved (i.e., viscous versus inviscid) and their side effects such as boundary layer ... -
NUMERICAL AND EXPERIMENTAL INVESTIGATION OF BURIED LARGE-DIAMETER STEEL PIPES WITH CONTROLLED LOW-STRENGTH MATERIAL
(2016-08-12)The main goal of this research was to gain an in-depth understanding of the behavior of buried large-diameter pipes with controlled low-strength material (CLSM). Design equations were developed based on extensive parametric ... -
Numerical and experimental investigation of variable transportation cooling for reusable thermal protection systems
(2014-12)This research work is focused on the numerical and experimental investigation of the transpiration cooling technique for reusable thermal protection systems. The transpiration cooling has been considered because of its ... -
NUMERICAL AND EXPERIMENTAL STUDY OF SINGLE PHASE AND MULTIPHASE DROPLET DYNAMICS ON ELECTROWETTING-ON-DIELECTRODE DIGITAL MICRO-FLUIDICS
(2018-10-12)In the recent years, significant efforts have been devoted to the development of droplet based lab-on-a-chip devices of which advantages include being programmable and reconfigurable. Among various droplet flow based ... -
NUMERICAL AND EXPERIMENTAL STUDY ON TURBULENCE PRODUCTION OF A SELECTED MODE OF STREAMWISE VORTEX INTERACTION IN SUPERSONIC FLOW
(2019-05-10)The development of effective mixing strategies of air/fuel mixtures in supersonic flows has been the subject of a significant body of research for the last 60 years due to the hindering effects of compressibility. Particular ... -
Numerical Construction of Diffeomorphism and the Applications to Grid Generation and Image Registration
(2016-08-12)Diffeomorphism is an active research topic in differential geometry. In this area, the existence and construction of diffeomorphism under certain constraints is an interesting and meaningful task. J. Moser first proved the ... -
Numerical Integration Of Matrix Riccati Differential Equations With Solution Singularities
(Mathematics, 2013-07-22)A matrix Riccati differential equation (MRDE) is a quadratic ODE of the form X' = A₂₁ + A₂₂X - XA₁₁ - XA₁₂X ; where X is a function of t with X : R Rnxm and the Aij's are constant or functions of t with matrix sizes ... -
NUMERICAL INVESTIGATION OF CONCRETE BREAKOUT STRENGTH OF ANCHORS IN SHEAR WITHIN FIBER REINFORCED CONCRETE
(2020-06-03)This study investigates the numerical analysis of concrete breakout strength of cast in place anchors in shear within synthetic fiber reinforced concrete (SYN-FRC). A three dimensional, full-scale model was developed using ... -
Numerical Investigation of Stability Characteristics of a Jet in Counterflow
(2017-08-22)A jet in counterflow is a configuration in which a jet is issued into an opposing external stream of fluid. Some of the possible applications of this configuration include study of pollutant discharge into body of water, ... -
Numerical Investigation Of Steady State And Transient Thermal Performance Of A Multi-chip Vapor Chamber
Effective dissipation of heat generated in microelectronic devices during operation is critical for reliability and performance, particularly for advanced architectures such as microserver chips. Vapor chambers are a class ... -
Numerical Investigation of Vortex Generator Flow Control for External-Compression Supersonic Inlets
(2017-05-04)Vortex generators (VGs) within external-compression supersonic inlets for Mach 1.6 were investigated to determine their ability to increase total pressure recovery and reduce total pressure distortion. Ramp and vane-type ... -
Numerical Investigation of Vortex Generators and Jet in Cross-Flow Enhancements
(2016-12-19)Vortex generators have extensively been used over the past few decades for heat transfer applications. Their passive form of enhancement coupled with the ease of their implementation is the primary reason for their growing ... -
Numerical LES For MVG Controlled Supersonic Ramp Flow
(Mathematics, 2014-12)An implicitly implemented large eddy simulation by using the fifth order bandwidth-optimized WENO scheme is applied to make comprehensive studies on ramp flows with micro-ramp vortex generators (MVG) at Mach 2.5 and Re=5760. ... -
Numerical Methods For Spontaneous And Evoked Glutamate Release
As synapses are responsible for the majority of neuron communications in the brain, the events of evoked and spontaneous synaptic vesicle release/fusion are key features of all synaptic current. These release events typically ... -
Numerical Modeling And Analysis Of Pile Supported Embankments
(Civil & Environmental Engineering, 2007-08-23)Very soft clays are often avoided in construction due to their low shear strength and high compressibility. Special construction methods are adopted when embankments are constructed on very soft clay or peat. Design of ... -
Numerical Modeling Of A Parallel Plate Electrowetting-on-Dielectric (EWOD) Device
(Mechanical Engineering, 2011-07-14)Numerical modeling and simulations have been performed in this study that focuses on modeling the fluid dynamics of an Electrowetting-on-Dielectric (EWOD) device. The case to be modeled in the present study is a droplet ... -
Numerical Modeling of an Alloy Droplet Deposition with Non-Equilibrium Solidification
(2016-05-16)Droplet deposition is a process of extensive relevance to the microfabrication industry. Various bonding and film deposition methods utilize single or multiple droplet impingements on a substrate with subsequent splat ... -
Numerical Modeling of Capillary Driven Microfluidic Flow
(2017-01-05)Capillary driven two dimensional axisymmetric and three dimensional asymmetric flow in various microfluidic applications have been modeled and analyzed numerically. The transient Navier-Stokes equations are solved using a ...