Browsing MS Theses - DO NOT EDIT by Issue Date
Now showing items 1-20 of 110
-
Wear and Tribofilm Formation With Zinc-free Antiwear Additives
(Materials Science & Engineering, 12-10-2012)Engine oil is used in all internal combustion engines to lubricate the moving parts & mitigate the wear due to friction. Along with the mentioned two functions, engine oil also serves to protect the engine from corrosion, ... -
Effect Of Additive Morphology & Chemistry On Wear & Friction Of Greases Under Spectrum Loading
(Materials Science & Engineering, 12-10-2012)The primary focus of grease development is to minimize friction and improve on wear and load bearing capacity. Traditional method to evaluate wear behavior of grease is based on ASTM D2266 which evaluates the performance ... -
Self-assembly Of Nanoparticles In Photonic Crystal Cavities For Optoelectronic Devices
(Materials Science & Engineering, 2007-08-23)Photonic crystals (PhC) offer many advantages in optoelectronics field. The focus of this thesis is to investigate a self assembly process for the formation of thin film based one-dimensional PhC and the integration of ... -
Micromechanical Analysis Of Yielding For Particulate Filled Composites
(Materials Science & Engineering, 2007-08-23)Particulate filled composites are hybrid materials which consist of particulates held together by a matrix. In this thesis, a simulation method to obtain overall failure criterion for particulate filled composites based ... -
Interactions Between Antiwear Agent And Novel Additive In Engine Oils
(Materials Science & Engineering, 2007-08-23)Research has shown that side/end products of phosphorus and sulfur compounds in engine oils reduce effective life of exhaust catalysts of automobiles resulting in harmful emissions. Thus environmental regulations have been ... -
Interlaminar Fracture Of Unidirectional Reinforced Composites With Toughnened Resin Systems
(Materials Science & Engineering, 2007-08-23)Several undisclosed fiberglass and carbon fiber laminates with toughened resin systems were tested and examined. Experiments were conducted to determine Modes I and II interlaminar fracture toughness for each of the nine ... -
Preparation And Characterization Of Doped Zinc Oxide
(Materials Science & Engineering, 2007-08-23)Cathodic electrodeposition was used to prepare thin films of ZnO doped with Cd, from oxygenated KCl electrolyte containing ZnCl2 and CdCl2 in various molar ratios ranging from 0 mM to 5.0 mM each. Evidence for doping was ... -
Piezoelectric Analysis For Hetrogeneous Medium
(Materials Science & Engineering, 2007-08-23)In the recent years, several types of piezocomposites have been fabricated since they have provided material properties superior to conventional piezoelectric materials. In order to design these composites, it is essential ... -
Synthesis And Characterization Of Multifunctional Oxides For Force And Gas Sensors
(Materials Science & Engineering, 2007-08-23)In this research work, the piezoresistivity phenomena in multifunctional oxides of La0.8Sr0.2MnO3 (LSMO) and composites of LSMO - (Ce0.12Zr0.88)O2 has been investigated for force and gas sensor applications in harsh ... -
Piezoelectric Micropump For Drug Delivery Application
(Materials Science & Engineering, 2007-08-23)Bending type actuators providing high displacement (~1mm) with low blocking force (~0.5N) and the stack actuators providing low displacement (~1m) with high blocking force (~1kN) represent the extreme ends of ... -
Surface Modification Of 6H-SiC Under Vacuum Annealing Studied By Time Of Flight Positron Annihilation Induced Auger Electron Spectroscopy
(Materials Science & Engineering, 2007-08-23)This thesis presents the first study of vacuum annealing of 6H- SiC surface using Time-of-Flight-Positron Annihilation induced Auger Electron Spectroscopy(TOF-PAES) . The study was the first application of a TOF-PAES ... -
Experimental Study Of Laminated Composite Tubes Under Bending
(Materials Science & Engineering, 2007-08-23)Bending stiffness of laminated composite tubes was determined experimentally using four-point bending test. The experimental results were compared with the results obtained by the laminated plate and smear property approaches. ... -
Cathodic Electrodeposition Of Cadmium Oxide, Zinc Oxide And Mixed Cadmium Oxide-Zinc Oxide Thin Films
(Materials Science & Engineering, 2007-08-23)Cadmium oxide (CdO) and (CdO)x(ZnO)1-x mixed semiconductor films were cathodically electrodeposited for the first time on F-doped SnO2 substrates. The CdO thin films were deposited from an aqueous 0.1 M KCl medium containing ... -
DNA Based Thin Film As Hole Transport Layer In Bulk Heterojunction Polymer Solar Cells
(Materials Science & Engineering, 2007-09-17)In the field of organic solar cell, the conjugated polymer-fullerene bulk heterojunction concept is one of the ongoing research interests. In this work, the use of de-oxyribose nucleic acid/ hexadecyl trimethyl ammonium ... -
Synthesis, Structure And Characterization Of Silver Doped Diamond Like Carbon Thin Films
(Materials Science & Engineering, 2008-04-22)Diamond like carbon (DLC) films have gained grounds in the biomedical field as an inert, biocompatible, low friction and wear resistant coating and are widely used in heart valves, coronary artery stents, dental implants, ... -
Thermally Activated Sulfurization Scheme for CuInS2 Solar Cells
(Materials Science & Engineering, 2008-04-22)Chalcopyrite Solar Cells are now being fabricated on flexible (polymer) substrates. However, CuInS2 solar cells have not been fabricated on the polymer substrates on the commercial scale due the sulfurization temperature ... -
Synthesis And Characterization Of Ferromagnetic Nanoparticles
(Materials Science & Engineering, 2008-04-22)Ferromagnetic nanoparticles and their bimagnetic nanoparticles with uniform size distribution have drawn great attention in the past decades because of their unique magnetic properties and potential applications in high ... -
Fabrication And Characterization Of Cobalt-Diamond-like-Carbon (Co-DLC) Nanocomposites
(Materials Science & Engineering, 2008-04-22)In recent years, synthesis of magnetic nanocomposites has been receiving significant attention. These nanocomposites offer opportunities to develop active nanomaterials with various applications like magnetic data storage ... -
Surface Patterning Of Biodegradable Polymer In Tissue Engineering By Applying Photolithography
(Materials Science & Engineering, 2008-04-22)The prevalence of cardiovascular disease and inherent problems with current surgical therapies has prompted major efforts in the field of vascular tissue engineering. While there have been significant advances towards ... -
Design And Fabrication Of Piezoelectric Micro Generator Using Laser Micromachining And MEMS Technique
(Materials Science & Engineering, 2008-09-17)An energy harvesting device based on PbPb(Zr0.52Ti0.48)O3-Pb(Zn1/3Nb2/3)O3 ceramics was fabricated by using laser micromachining technique. It was found that the laser machining process did not have a significant effect ...