Search
Now showing items 41-50 of 916
Optimal-control Theoretic Methods For Optimization And Regulation Of Distributed Parameter Systems
(Aerospace Engineering, 2009-09-16)
Optimal control and optimization of distributed parameter systems are discussed in the context of a common control framework. The adjoint method of optimization and the traditional linear quadratic regulator implementation ...
Development Of Optical Fiber Sensors For Distance, Refractive Index And Strain Measurement
(Mechanical Engineering, 2009-09-16)
This thesis is focused on the development of optical fiber based sensors for the measurement of distance, refractive index, and strain. The fabrication, implementation, analysis, and evaluation of the sensors are presented. ...
Stress Analysis Of An Ellipsoidal Inclusion
(Mechanical Engineering, 2007-09-17)
The focus of the present thesis is to develop a mathematical model to calculate the stresses inside an ellipsoidal inclusion present in an infinitely extended matrix region and to validate the mathematically derived model ...
Multi Objective Optimization Of Graphite Heat Spreader For Portable Systems Application
(Mechanical Engineering, 2010-03-03)
The advancement made in portable electronic systems has primarily been due to miniaturization of electronic systems. This in turn leads to an increase in power density which leads to higher temperatures and formation of ...
Parametric Cycle Analysis For Pulse Detonation Engines
(Aerospace Engineering, 2007-08-23)
The performance of an ejector-driven pulse detonation engine (PDE) with an afterburner is analytically estimated. In the analysis, the PDE was modeled as a straight tube, closed at the front end and open at the other. A ...
Enhancement Of Pool Boiling Heat Transfer Using Thermally-conductive Microporous Coating Techniques
(Mechanical Engineering, 2007-08-23)
The present research is an experimental study of the enhancement of boiling heat transfer using microporous coating techniques. The current research is divided into four major phases. During the first phase, the effects ...
Numerical Simulation Of Particle Adhesion Dynamics For Applications In Nanomedicine And Biosensing
(Mechanical Engineering, 2009-09-16)
Multifunctional nanoparticles hold considerable promise as the next generation of medicine that allow for detection of early on-set of diseases and targeted therapy with minimal toxicity. To achieve targeted drug delivery, ...
Cae Tools For Modeling Inertia And Aerodynamic Properties Of An R/c Airplane
(Mechanical Engineering, 2009-09-16)
Recently there has been significant research in the field of Unmanned Aerial Vehicles (UAV). For efficient deployment and operation of these vehicles, it is imperative that one understands the physical system. This in turn ...
Enhancement Of Cryoinjury By Use Of Eutectic Crystallization Of An Amino Acid Adjuvant
(Mechanical Engineering, 2007-08-23)
Enhancement of cryoinjury by use of eutectic formation was investigated to improve the efficacy of cryosurgery. Although the enhancement of cryoinjury associated with eutectic crystallization of sodium chloride (NaCl) has ...
On The Near Field Mean Flow Structure Of Transverse Jets Issuing Into A Supersonic Freestream
(Aerospace Engineering, 2008-04-22)
The near field mean flow structure of transverse jets issuing from a surface into
supersonic crossflow is examined using numerical methods and separation topology. The
Navier-Stokes solver Falcon, developed at Lockheed ...